How To Install Data Backup Safe Docking Station

Click here to enter for a chance to win a Data Backup Safe. Will secure up to 52 CD's or DVD's or up to six 2.5 inch external hard drives or an external Hard Drive such as the Maxtor One Touch. That is a massive amount of backed up data that can be secured in such a small, high security, light-weight Data Safe.

Recommended
Security Products

Made in Australia.

Click link or picture
to visit Web Site.
Open in new window.

Wheel Clamp

Stop thieves stealing your towable Vehicle.

Designed to fit all diameter and width wheels from a Wheel on a Jet Ski Trailer up to a Wheel on a 4WD Camper Trailer. How innovative is that...

Other
Wheel Clamp
Web Sites

	Trailer Wheel Clamp
	Caravan Wheel Clamp
	Trailer Security
	Wheel Lock

Padlock Protection

Unique Impenetrable
Security System

Designed to replace
a Padlock and
Mild Steel Chain.

Don't wait until your possessions are stolen.

High Tensile Chain

10mm diameter
High Tensile Chain Quotation / Enquiry Form

Cannot be cut with a:
	Standard Bolt Cutter
	Hack Saw
	or any other non powered hand-held metal cutting tool.

Padlock Protector

Patented
Steel Shroud

STOPS the three methods 99.9% of all thieves use to break a Padlock or Mild Steel Chain, they are:

	Leverage
	Hammer
	Bolt Cutter Attack

Docking Station Installation Information

Due to public liability and general insurance reasons we cannot state exactly how to install a Data Backup Safe Docking Station into any surface.

But what we can do is list ways the Data Backup Safe Docking Station has been previously installed in various locations by us and purchasers throughout Australia and world-wide. This allows the purchaser to make the final decision about how their Data Backup Safe Docking Station is installed.

Docking Station
top view.

NB: As the Data Backup Safe Docking Station can be installed to many different surfaces the following covers most known surfaces.

Important Notice Disclaimer

It is the purchaser responsibility
to make the final decision how their
Data Backup Safe is installed.

Docking Station

Fastener types to install
a Docking Station.

Click to enlarge.

The Data Backup Safe Docking Station can be installed to almost any flat surface and at any angle, even upside down. The Docking Station has pre-drilled holes in it and we recommend what ever type of fastener you decide to use to install the Docking Station you place a fastener in the 10 pre-drilled holes to install it, 5 along each side of the Docking Station.

The picture to your left shows various fastener types that can be used depending on what the Docking Station is being installed to.

mk3 Docking Station

The mk3 Docking Station is made from two Docking Stations joined together in the centre. When installed correctly the mk3 Docking Station is kept rigid by what it is affixed to eg. Brick, Concrete or Wood Wall or Floor, Vehicle Fixing Kit Steel Bracket, Marine Ply, 6mm Ply / Craft Wood, 3mm Steel Plate and other surfaces not mentioned.

mk3 Docking Station top view,
will secure two Data Backup Safes.

We suggest what ever fastener type you decide to use to install the mk3 Docking Station, you place a fastener in the 5 pre-drilled holes on both sides of each Docking Station used to make the mk3 Docking Station.

NB: That suggests we recommend placing your chosen fastener type in 20 pre-drilled holes to install a mk3 Docking Station.

Fixing Holes In The Docking Station Not Big Enough

If the pre-drilled fixing holes in the Docking Station are not large enough for your selected fastener type eg. screws / bolts etc. it is ok to enlarge the holes by using a high speed steel drill, the same diameter as the fastener.

This ensures, if a thief did find your Data Backup Safe it would be practically impossible to prize it away from the surface it is installed to eg. Brick, Concrete, Wood Wall or Floor, to the floor in a Caravan or Motor Home and any other surface not mentioned.

Since 1993, when the Safes were first sold,

we are not aware of a single installed

Data Backup Safe ever being stolen.

Fastener Types Used To Install The Docking Station

The following are suggestions about the fastener types that can be used to install the Data Backup Safe Docking Station onto common known surfaces.

Wood including Marine Ply or other Wood Composite Products

Coach Bolts, Coach Screws, Type 17 Tek Screws or a minimum 8 gauge full thread Wood screws, as long as possible. NB: Make suitable allowance for the thickness of the attaching medium when deciding on the fastener length.

Acrylic water based glue
and its applicator.

Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) plus the fastener type mentioned above.

Steel

	Coach Bolts, Coach Screws, special one way Security Screws, Tek Screws, large diameter Steel Pop Rivets, Self Tapers / Metal Thread Screws.
	Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) plus the fastener type mentioned above.

Marble - generally under a kitchen bench top.

Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) may be used, however we highly recommend you contact your kitchen manufacturer for their recommendation.

Brick or Concrete

	Specific heavy duty masonry fastenings.
	Loxins as the bolt head stays a consistent height as the nut is tightened.
	Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) plus the fastener type mentioned above.

NB: Plastic Raw Plugs or similar

ARE NOT TO BE USED

under any circumstance.

Acrylic Glue

It is important to note if you every intend moving the Docking Station to another location we suggest you DO NOT use Acrylic glue. Using Acrylic glue is for the permanent fixing of a Docking Station.

Security product web sites you may be interest in.

What To Do Next...

	Go to Price List / Secure Order Form for a complete price list of all our products and accessories and to place your order.
	OR - Do you require a quotation and / or information sent to you? Go to Enquiry / Quotation Form.
	OR - For further information about the Data Backup Safe please contact us.
	OR - Keep reading through this Web Site to learn all about the Data Backup Safe and WHY YOU MUST, for your own protection, backup your new data every day and secure your backed up data in a Data Safe. Preferably in the Unique, Relocatable, High Security, Light-Weight, Australian designed, manufactured and very cost effective, Data Backup Safe.